home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC Plus SuperCD 6
/
SuperCD_6 CD.iso
/
WIN95
/
RKTOOLS
/
RESKIT3.CAB
/
iniprep.inf
< prev
next >
Wrap
INI File
|
1995-06-03
|
3KB
|
104 lines
; These statements shows examples of how to replace
; configuration-file settings before installing Windows 95.
; This example shows statments for upgrading real-mode TCP/IP
; under Microsoft Windows for Workgroups 3.11.
; All existing user, network and printer settings are retained.
; This example uses manual entries for configuring Microsoft TCP/IP.
; For an example that uses DHCP for configuring TCP/IP, see MSNET.INF.
[SETUP]
; 0 = stop for user input, 1 = do not stop for user input
Express=1
[NETWORK]
; 0 = do not prompt for network information
; (use defaults) for values not defined in the script
; 1 = prompt for network components
Display=0
; Install Windows 95 protected-mode protocols.
Protocols=NETBEUI,NWLINK,MSTCP
; The following section sets values for Microsoft TCP/IP.
; These settings specify LMHOSTS for NetBIOS computer name resolution.
[MSTCP]
; 0 = do not use DHCP for TCP/IP configuration, 1 = use DHCP
DHCP=0
; Remove ";" and enter the correct IP address for this computer.
;IPAddress=2.2.2.2
; 0 = do not use DNS or LMHOSTS for name resolution, 1 = use DNS or LMHOSTS
DNS=1
; Set path to LMHOSTS file used for name resolution
LMHOSTPath="C:\WINDOWS"
; If DNS=1 and you are using DNS servers,
; remove ";" and enter IP addresses for your DNS servers.
; Separate multiple addresses with commas.
;DNSServers=1.1.1.1
; If DNS=1 and you are using DNS servers,
; remove ";" and add the DNS domain name for this host.
;Domain=microsoft.com
; Specify host name (usually computer name) for this computer.
Hostname=MyPC
; If DNS=1 and you are using DNS servers,
; remove ";" and add the IP addresses for DNS gateways.
; Separate multiple addresses with commas.
;Gateways=3.3.3.3
; If DNS=1 and you are using DNS servers,
; enter a comma-separated list of DNS domains to search.
DomainOrder=
; 0 = do not use WINS for NetBIOS name resolution, 1 = use WINS,
; or DHCP = get WINS values from DHCP server
WINS=0
; The statements here use LMHOSTS for name resolution.
; If WINS=1, remove the ";" in the following entries and
; add correct IP addresses for Windows NT WINS servers.
;PrimaryWINS=x.x.x.x
;SecondaryWINS=y.y.y.y
; Usually ScopeID is not required.
; Remove ";" and enter a value if required by the network administrator.
;ScopeID=
; The following [Install] section and related [<update>] sections
; specify the new software components to be used for TCP/IP before Setup runs.
[INSTALL]
UpdateInis=Update_prot.ini
UpdateIniFields=Update_iflds.ini
UpdateAutoBat=Update_autoexec.bat
UpdateCfgSys=Update_config.sys
; Update entries in PROTOCOL.INI
[UPDATE_PROT.INI]
protocol.ini,TCPIP,*,
system.ini,386Enh,"device=vsockets.386",
system.ini,386Enh,"device=vbapi.386",
; Update entries in SYSTEM.INI
[UPDATE_IFLDS.INI]
system.ini,"network drivers",transport,tcpdrv.dos
system.ini,"network drivers",transport,nemm.dos
; The following section is optional,
; since Setup will automatically remove the following lines.
[UPDATE_AUTOEXEC.BAT]
DevDelete=c:\windows\umb
DevDelete=c:\windows\tcptsr
DevDelete=c:\windows\tinyrfc
DevDelete=c:\windows\nmtsr.exe
DevDelete=c:\windows\emsbfr.exe
; No required changes for CONFIG.SYS, so this section is empty.
[UPDATE_CONFIG.SYS]